Project code

Title of the Project

Year

IEJ1401

GSM Wireless Technology Implementation in Haze Monitoring

2014

IEJ1402

Implementation of a Web of Things based Smart Grid to remotely monitor and control Renewable Energy Sources

2014

IEJ1403

A Very  Simple User Access  Control  Technique  through  Smart Device Authentication using Bluetooth  Communication

2014

IEJ1404

Automated Irrigation System Using a Wireless Sensor Network and GPRS Module

2014

IEJ1405

Development of a Cell Phone Based Vehicle Remote Control System

2014

IEJ1406

Non-invasive Blood Pressure Remote Monitoring Instrument Based Microcontroller

2014

IEJ1407

Design and development of precision agriculture system using wireless sensor network

2014

IEJ1408

Wireless sensor based energy conservation via Bluetooth

2014

IEJ1409

Design and Implementation of Heart Rate Measurement Device Using Wireless System 

2014

IEJ1410

Application of Data Acquisition System for Superconducting Quantum Interface Devices (SQUID) at Remote Location

2014

IEJ1411

A reconfigurable Smart Sensor Interface for Industrial WSN in IoT Environment

2014

IEJ1412

Sensor Node Failure Detection Based on Round Trip Delay and Paths in WSNs

2014

IEJ1413

Differentiated Virtual Passwords, Secret Little Functions, and Codebooks for Protecting Users From Password Theft

2014

IEJ1414

WSN-Based Smart Sensors and Actuator for Power Management in Intelligent Buildings

2014

IEJ1415

Data  Centre Monitoring and Alerting System  using WSN

2014

IEJ1416

Harmful gases Wireless Network Monitoring System Design

2014

IEJ1417

Embedded System for Home Automation  Using SMS

2014

IEJ1418

GSM CONTROLLED ROBOTICS 

2014

IEJ1419

Microcontroller managed module for automatic ventilation of vehicle interior

2014

IEJ1420

Smart Card for Banking with Highly Enhanced Security System

2014

IEJ1421

A Novel Approach Railway Track Damage Detection Robot Using GPRS Technology

2014

IEJ1422

A Review on Web based Embedded System for Remote Monitor and Controller

2014

IEJ1423

Effective CAN Controller Design for Highly Secured Applications

2014

IEJ1424

Automatic Gate Control System Based  On Vehicle License Plate Recognition

2014

IEJ1425

Accident  identification  with automatic  ambulance  rescue system

2014

IEJ1426

E-Voting System Using GSM Mobile SMS

2014

IEJ1427

A Low Cost GSM and GPS Enabled Liquid Fall Detection System for Medical Applications

2014

IEJ1428

MEMS Based Gesture Controlled Robot Using Wireless Communication

2014

IEJ1429

Real-time Safety Measures in Railways Using Embedded System

2014

IEJ1430

Efficient and Cost Effective Vehicle Tracking and Security System Using Global Positioning System

2014

IEJ1431

Cell Phone Operated Devices with Voice Acknowledgement

2014

IEJ1432

SMART-HELMET-FOR-MINERS-USING-WSN

2014

IEJ1433

Smart Home Automated Control System Using Android Application and Microcontroller

2014

IEJ1434

Zigbee Based Real - Time Monitoring System of Agricultural Environment

2014

IEJ1435

Fourth generation voting system

2014

IEJ1436

Towards the Implementation of IoT for Environmental Condition Monitoring in Homes

2013

IEJ1437

Smart Home system using Android Application

2013

IEJ1438

Remote-Control System of High Efficiency and Intelligent Street Lighting Using a Zigbee Network of Devices and Sensors

2013

IEJ1439

Design and Implementation of Real Time Embedded Tele-Health Monitoring System

2013

IEJ1440

GSM Based Automatic Energy Meter Reading System with Instant Billing

2013

IEJ1441

Wireless sensor network for multi storey building design and implementation

2013

IEJ1442

Automated Control System for Air Pollution Detection in Vehicles

2013

IEJ1443

Intelligent House hole LED lighting system considering energy efficiency and user satisfaction

2013

IEJ1444

Remote Control of Home Lighting Devices with RFID Identification and Current Detection of Outlets

2013

IEJ1445

RFID-based Tracking System Preventing Trees Extinction and Deforestation

2013

IEJ1446

A Smart Prepaid Energy Metering System to Control Electricity Theft

2013

IEJ1447

An Integrated Health Management Process for Automotive Cyber-Physical Systems

2013

IEJ1448

Environment monitoring and device control using

ARM based Embedded  Controlled  Sensor Network

2013

IEJ1449

Child Activity Recognition Based on Cooperative

Fusion Model of a Triaxial Accelerometer

and a Barometric Pressure Sensor

2013

IEJ1450

Metro over head tanks monitoring system using Zigbee based WSN

2013

IEJ01

Design of Concealed Alarm System Based on GSM

2012

IEJ02

Design of Intelligent Home Appliance Control System Based on ARM and ZigBee

2012

IEJ03

Wireless Black Box Using MEMS Accelerometer and GPS Tracking for Accidental Monitoring of Vehicles

2012

IEJ04

Embedded Ethernet Monitor And Controlling Using Web Browser

2012

IEJ05

Bus Monitoring System Based On ZigBee And GPRS

2012

IEJ06

On the Impact of Virtual Traffic Lights On Carbon Emissions Mitigation

2012

IEJ07

Robust Railway Crack Detection Scheme (RRCDS) using LED-LDR

Assembly

2012

IEJ08

Anti-theft Security System Using GSM,   GPS, RFID Technology Based on ARM 7

2013

IEJ09

Locker Opening And Closing System Using RFID, Fingerprint, Password And GSM

2013

IEJ10

Remote Monitoring And Controlling Using Cascaded

ZigBee Communication

2013

IEJ11

Robot Navigation System with RFID and Sensors

2012

IEJ12

Implementation Of Can And ZigBee Networks Based Industrial Monitoring And Control Applications

2013

IEJ13

Position Matching Based Autonomous Speed Regulation System for Vehicles

2011

IEJ14

Study on the Embedded CAN Bus Control System in the Vehicle

2012

IEJ15

Automatic-Vehicle-Accident-Detection-And-Messaging-System-Using-GPS-and-GSM-Modems

2013

IEJ16

RFID-And-GSM-synthesis-for-authenticated-ATM-transaction

2013

IEJ17

Electronic Protection To Exam Paper Leakage

2013

IEJ18

Design And Development Of A Modern Vigilance Control System To Enhance The Rail Passenger Safety Using GSM And GPS Technology

2013

IEJ19

A Data Acquisition System for Methane Drainage Based on ARM

2011

IEJ20

A ZigBee-Based Wearable Physiological Parameters Monitoring System

2012

IEJ21

Touchpad-Controlled-Vehicle-a-Car-in-Future

2013

IEJ22

Smart-walking-stick-an-electronic-approach-to-assist-visually-disabled-persons

2013

IEJ23

GPS-GSM Integration for Enhancing Public Transportation Management Services

2010

IEJ24

Real-Time Atomization of Agricultural Environment for Social Modernization of Indian Agricultural System

2010

IEJ25

Remote Energy Monitoring, Profiling and Control  Through GSM Network

2012

IEJ26

ZigBee Electric Vehicle Charging System

2010

IEJ27

ZigBee Wireless Mesh Networks for Building Automation and control

2011

IEJ28

Digital Control for Home Lighting System with ZigBee Communication

2011

IEJ29

Design and Development of a Hand-glove Controlled Wheel Chair

2011

IEJ30

A Low Cost Design & Monitoring Of Automatic Irrigation System Based On ZigBee Technology

2013

IEJ31

ARM7  Based Wireless Visual Data Acquisition System

2013

IEJ32

Automatic Measurement and Reporting System of Water Quality Based on GSM

2012

IEJ33

Ultrasonic Spectacles and Waist-belt for Visually Impaired and Blind Person

2012

IEJ34

The Design And Implementation Of  ID Authentication System Based On Fingerprint Identification

2011

Project code

Title of the Project

MIN1401

Advanced secured ATM system with three layer security protection

MIN01

Advanced low cost voice recognition based smart home/office automation using android

MIN02

Designing of smart and secure single ATM card for multiple bank accounts

MIN03

Real-time vehicle theft control system using engine temperature measuring technique

MIN04

Smart electronic feedback system to save paper and time using RFID technology

MIN05

Innovative digital energy meter with over load indicator and power theft control

MIN06

RFID technology based reminder system for smart home

MIN07

Designing of switching system for AC powered appliances using micro controller

MIN08

Automatic speed regulation of vehicles based on speed zones using RF technology

MIN09

Advanced Smart energy saving system for modern railway station platform lighting control

MIN10

Designing of user friendly paper presentation control system using RF technology with  LASER light pointer

MIN11

 Design and development of a hand glove controlled wheel chair

MIN12

Design of Concealed Alarm System Based Security system for Banks and shopping malls using GSM

MIN13

RFID technology based system which detects the icons beside the road for safe driving

MIN14

Controlling multiple streetlights with single SMS with failure street light indication via SMS

MIN15

Advanced low cost voice recognition based robot direction control using android

MIN16

Designing of Electric shock proof system to control electrical appliances using touch screen

MIN17

Remote operated Smart electronic voice guider for physically disabled/bed ridden patients or old age people

MIN18

Voice operated low cost Instant status or notice updating system using android

MIN19

Electronic security and tourist guider in  multiple language for museums and exhibitions

MIN20

Monitoring of patients via secure and mobile health care system using GSM

MIN21

Design of accurate universal digital clock using GPS for time synchronization applications

MIN22

Design and development of Touch and Voice based electronic slate for Kids

Project code

Title of the Project

Description

FS01

Standalone data logger in SD/MMC card with time stamp for industrial applications.

In this we will monitor and store different parameters in industry like temperature, voltage, etc .We will store these parameters values in SD card along with measured time and date also. The stored data format will be in .txt file or excel format so that we can go through entire monthly data using system.

FS02

RFID based real-time attendance system with data storage in SD/MMC card for offices and colleges.

This is a standalone attendance system. In this we will store the employee or student IN and OUT times with date in excel format.

FS03

Point to point GPS data logger for cab vehicles monitoring systems

In this we will store the GPS values of vehicle position for each 2 seconds as vehicle is moving. These values will be stored in either txt or excel format and we can see the entire path of the vehicle in Google earth using some special software. This will be useful for cab owners and other vehicles also.

FS04

Monitoring of arrival and departure timings of government busses in bus stops-store the arrival and departure timings in SD/MMC card

This system stores the arrival and departure timings of busses automatically when the bus stops in that stop. Each bus will be attached with one unique RFID card and RFID reader will take the data of bus from that card when it stops in bus station and micro controller will store the bus timings in memory card. With this we can monitor strictly to avoid not stopping and missing trips problems.

FS05

Advanced embedded system based a paperless feedback system for colleges and event management systems

As we know to save our world we have to reduce usage of paper. This project helps in eliminate papers used in feedback systems. In this the feedback and suggestions should be entered from key board and this data will be stored in memory card in a file format using ARM7 micro controller.

FS06

Mobile signal strength analyzer in different areas to identify poor signal strength areas using GSM and GPS

This system is useful for mobile signal strength survey report. We will measure signal strength of particular GSM network in that areas and store that information in memory card for further report.

FS07

Biometric based secured  real-time attendance system with data storage in SD/MMC card for offices and colleges

This is a standalone attendance system. In this we will store the employee or student IN and OUT times with date in excel format. This system is more secure and reliable.

FS08

Advanced embedded security system with image capturing in SD/MMC card

This system will take the pictures and save those pictures in JPEG format in memory card. This can be used in banks, industries ,traffics signal junctions, homes, in vehicles, etc.

Project code

Title of the Project

Description

ET01

Industry parameters monitoring and controlling system based on embedded web server.

In this we will monitor industry parameters like current, voltage, temperature, etc through  online using internet from anywhere in the world and we can also control electrical appliances from internet.

ET02

Virtual care taker-online patient monitoring system.

With this we can monitor patient from anywhere. We can monitor our old aged people from internet itself.

ET03

Zigbee and internet based advanced street light controlling system.

With the help of internet and Zigbee technology we can reduce man power in street light controlling process. We can control street lights from online itself.

ET04

Internet based data acquisition and display on web page.

With this we can monitor data of any industry like temperature, light intensity, humidity in online from anywhere in the world using internet.

ET05

Internet based home/office automation.

With this system we can control any electrical appliances of home or office from anywhere in the world using internet.

Project code

Title of the Project

Description

TF01

Micro controller based photo frame with TFT LCD.

With this we can display different attractive frames on TFT LCD.

TF02

Industry/Home automation using TFT LCD and touch screen.

With this we can operate electrical appliances of industry or home using touch screen and TFT LCD. The devices images are displayed on TFT so we can easily operate whatever device we want just by touching on respective image.

TF03

Digital slate-an innovative slate for easy and fast learning process.

In this letters are displayed and we have to draw same letter on that display only. We can erase any number of times and we can design many letters pictures.

TF04

CAN based dash board implementation and display data on TFT LCD.

With this we can collect parameters in vehicles using CAN and display those parameters like speed, fuel, tire pressure, etc on TFT LCD.

TF05

Interfacing TFT LCD  with micro controller

In this we will display the entered data from keyboard on TFT LCD.

Project code

Title of the Project

Description

CN01

Industrial automation and process control system using CAN bus.

In this we will measure industry parameters like temperature and light intensity and will control the machines accordingly using CAN bus.

CN02

Ethernet and CAN interfacing for industrial automation.

With this we can control various loads of industry from anywhere using Ethernet .and within industry all loads are connected to central unit using CAN bus.

CN03

CAN base collision avoidance system for automobiles.

This system is used to avoid the accidents in vehicles using CAN protocol.

CN04

Distributed remote temperature monitoring and acquisition system based on CAN bus.

In this we will measure the temperature and control the process according to temperature using CAN.

CN05

Construction of intelligent greenhouse monitoring and control system based on CAN bus (IEEE2010).

This system always keeps constant temperature and light intensity for green houses.

CN06

Industrial multi parameters data logger using CAN bus.

In this we will measure and keep display the data of different parameters of industry using CAN protocol

CN07

Automobile dashboard implementation using CAN bus.

In this we will measure different parameters of vehicle like speed, fuel level, etc and also we will control airbag

CN08

Implementation of can and ZigBee networks based industrial monitoring and control applications

This can be used to monitor and control industries effectively .In this we are using CAN protocol and ZigBee wireless system.

Project code

Title of the Project

Description

Cost

GPRS01

Vehicle tracking based on GPRS.

With this we can see our vehicle position in online.GPS and GSM modem places in vehicle. This GSM modem updates the GPS values in server using GPRS feature.

GPRS02

Billing information updating system based on GPRS.

This system completely eliminates the manpower in billing systems like water bill, electricity bill, etc. This system updates the electricity units consumed by that user in server using GSM and GPRS feature.

GPRS03

GPRS based Data acquisition system

With this we can monitor parameters of industry like temperature, voltage, etc through online. The data will be updated using GSM modem with GPRS feature.

Project code

Title of the Project

Description

RT01

Single or Multi electronic notice boards with operating distance up to 1000meters using RS485 protocol  

with this we can send message to electronic notice board from PC, and the notice board can be place anywhere within the range of 1000meters (1km) and we can control more than one notice board from same computer and different messages for different boards is also possible.

RT02

Real time vehicle tracking with vehicle location indication on Google earth

This will show your vehicle current position exactly on Google earth

RT03

Efficient power saver for street lights using LDR, RTC, LEDs light with solar power

This project saves more power that is being wasted in present street light switching. In this we will consider time and sunlight intensity and we use LED lights and solar power

RT04

Station names with distance indicator in railways

This project is useful for passengers in trains or buses. In this the distance of next station will be displayed using GPS so that the passenger will come to where he is and how far he is from his destination.

RT05

Wireless controller for operating power point presentations with laser light indication.

This project eliminates the use of second person to operate the PPT. It can be controlled by the person who is giving that PPT with the help of any wireless remote

RT06

Voice guider and medicine reminder for patients and old age persons

In this the user will be given one remote (IR or RF or ZIGBEE), he has to press any button to get what service he wants and that is played from voice IC so that any person can hear it and come to the user. Another feature of this project is to remind the user for medicines

RT07

Agricultural motor controlling with motor safety and water level indicator using GSM.

The former can control his field motor without need of going to his field just by sending message. This system also provides safety motor from over heat, low phase power and water level indication.

RT08

Industrial data logger using RS485.

In this we will display the some sensors data from different places in industry, the sensor boards can be placed anywhere in the industry within in the distance of one Kilometer.

RT09

Voice / touch screen /MEMS controlled Wheel chair for patients and physically challenged persons with capacity upto100Kgs

In this any user can operate this wheel chair with different controlling methods without need of another person and this can bare weight up to 100Kgs

RT10

Intelligent shopping trolley using RFID

With this we can save billing time and instantaneously the rate and expiry date of the product will be displayed so that we can do the shopping within our budget

RT11

Elegant home with power saving, security, safety, remote controlling and auto control of water tank motor

In this we will provide multi features to home like remote controlling of  home appliances ,auto controlling of lights depends upon sunlight and auto controlling of water tank motor when  tank is full and alert the user when intruders come or when gas leakage or fire accident occurs

RT12

Intelligent train engine to avoid accidents and controlling railway gate automatically

In this we will control the train by monitoring the driver’s position or activeness and the gate will b e controlled automatically when train is near the gate.

RT13

Vehicle theft control and accident location intimation through SMS

This project provides security for your vehicles, with this vehicle will be controlled by only owner’s permission and it also sends a message of vehicles location   when it meets with any accident

RT14

Intelligent traffic signaling priority system for ambulances and VIP vehicles

The traffic signals will be controlled automatically when any ambulance or VIP vehicle sends a request   with indicating their root

RT15

Automatic marks sending system to students through SMS

Whenever the authorized student sends a message to this system it send the students marks through SMS

RT16

Automation of tollgate and blocking of unauthorized vehicles

This system automatically collects the toll tax and allow the vehicles if they pay sufficient tax .it also checks whether particular vehicle has permission or not to go out.

RT17

Electronic health card

This system completely reduces the paper usage. Medicines prescribed by the doctor and patient test reports are stored in this card .this card can be used for future reference in any hospital

RT18

Bus departure indication and auto announcement system in bus stops, useful in rural bus stops

With this we can come to know whether particular bus arrived or not

RT19

Child safety management system using RF Technology.

With this project we can easily identify if any child crosses predefined area. This is useful in kid care centers, apartments and in schools

RT20

Cost effective energy billing system.

It collects the data from each house in apartment and generates the bill according the charges at that time through Zigbee and sends the message to electricity board. It also disconnect the power if bill is not paid before due date

RT21

Advanced bus ticketing system with alert to passenger

This module is equipped in bus. Passengers has to take the ticket using smart card while taking ticket money will be deducted and their destination will be saved. Whenever bus reaches their station it automatically indicates to the driver till they get down in that station

Project code

Title of the Project

Description

GG43

College Timetable and notice board display with auto SMS to faculties

This will display the current period subject name ,faculty name and also sends alert message to next faculty, And it also display notices also

GG44

Electronic protection to exam paper leakage

This system is used to avoid exam paper leakages this will be done using RFID and GSM technologies

GG45

Design and development of a modern vigilance control system to enhance the rail passenger safety using GSM and GPS technology

This paper is proposed to prevent train accidents (due to un-alertness of engine drivers) by designing engines

with a new emergency braking system

GG46

Anti-theft Security System Using GSM,   GPS, RFID Technology

With this we will provide more security system for our vehicles

GG47

Locker opening and closing system

Using RFID, fingerprint, password

And GSM

With this we will provide more security system for our lockers. Here we are implementing three level security system

GPNEW1

Position Matching Based Autonomous Speed Regulation System for

Vehicles.

These systems automatically detect low speed zones and control the speed of the vehicle to that speed zone level.

GG01

Automatic Streetlight On/Off with SMS Controlling and   light                           Failure detection with SMS indication.

Controlling of streetlights through SMS is carried out in this project. If any light is not glowing due to some failure, the system indicates this failure and sends an SMS to the user mobile.

GG02

Supervisory control and data acquisition system (SCADA) using GSM modem

In this we will monitor different parameters in industry like voltage, current, temperature, etc and send a message when any abnormal condition is occurred.

GG03

UPS Battery monitoring system over GSM for High availability system

Voltage of battery is continuously monitored and send a message when it is about to reach below cut off levels.

GG04

GPS based border alert system for fishermen with boat speedometer

In this we will intimate the fishermen when they cross their borders using GPS

GG05

Automatic power meter reading system using GSM network

power consumed is measured by power meters and this data is sent to electricity board through SMS 

GG06

RFID and GSM based intelligent courier mailbox system with automatic delivery notification

This system sends a message to user when his courier reaches its destination

GG08

A smart GSM based embedded solution for continuous remote monitoring of cardiac patients

In this the patient heart beat and temperature will be monitored continuously and sends a message to relevant persons when abnormal state is occurred

GG09

GPS based vehicle travel location data logger with 2GB MMC/SD Memory card

In this we will store the locations latitude and longitude vales traveled by the vehicles with time stamp in memory card

GG10

GPS and GSM based office cab monitoring, alerting and logging system

This system sends a message to the owners when the cab reaches its destination and also send the present to the employees who travel in that cab 

GG11

Flexible load sharing of transformer with GSM SMS

It continuously measure the load current and it shares this load with another transformer when the load is more and send an alert through message. The user can also share directly whenever he wants just by sending message

GG12

GSM Based Smart Information System For Lost ATM Cards

The system provides the information about the lost ATM card to his mobile. The user receives a message whenever this card is placed into an ATM machine or used in any banks. 

GG13

Vehicle Tracking and Security System using GSM and GPS

The project is designed to track the vehicle using GPS and send the information of the vehicle to the user mobile using GSM.

GG14

Agriculture field motor control system using GSM

Motors in the field are controlled with the help of predefined SMS. 

GG16

Accident Identification System using GSM And GPS

The project designs a system that tracks the vehicle continuously and if the vehicle is met with an accident, the system immediately identifies this and sends an SMS to the family members or to the doctor.

GG17

Patient Monitoring and Alert System using GSM

Monitors the health of a patient through SMS.

GG18

Home Security System using GSM

Providing security to the homes using GSM

GG19

Industrial Electrical Devices Control System

By this project, we can control the devices in the industries by sending predefined SMS to the controlling unit.

GG20

Automatic Fire Detection and Alert System

Alerts when fire accidents occur to a predefined number.

GG21

Weather Monitoring system  in remote places

It is useful for gathering the environment variables from remote geographical areas for prediction of the weather.

GG22

GSM based DC Motor Speed and Direction Control

The speed and direction of DC motor can be controlled by sending predefined SMS to the system

GG23

SMS Based Electrical Appliances Apparatus Control in homes or  offices

The status of electrical appliances can be monitored continuously and can be altered by sending predefined SMS to the controlling unit.

GG24

Embedded Automatic Robotic Car through SMS

The robotic car can be controlled and can be made to move in a particular direction by sending predefined SMS to the unit controlling the direction of the car.

GG25

Electricity billing

 Using GSM.

Billing the electricity units consumed and sending the bills using GSM.

GG26

Substation Monitoring and Controlling System using GSM

The temperature, voltage and current in the substation are measured and sent to the user and alerts the user when they are over loaded.

GG27

Water reservoir monitoring and pump system using GSM

Water level  in reservoir  is measured and pumping system is controlled through SMS

GG28

Industrial Data Logger using GSM

The parameters like temperature, intensity voltage and current are sent to the user.

GG29

Speed Control of Thread Roller’s AC motor in Spinning Mills using GSM Modem

The speed and direction of AC motor are controlled using TRIAC and GSM modem in this project.

GG30

Real-time Industrial process controlling & monitoring using Mobile

Controlling the industrial processes and checking the status of the processes whenever necessary using GSM mobile.

GG31

Intelligent System for Hazardous Gas, Human Detection and Temperature Monitor Control using GSM

The system uses sensors for gas detection, human entry and to monitor the temperature. Whenever these sensors trigger from their normal behavior, the system immediately sends an SMS to the user mobile.

GG32

An Advanced Embedded Mobile Web Server for Aged People Monitoring and Parameter back Reception using GSM

Monitors the health conditions of the aged people continuously and if any parameter goes beyond the expected values, the system sends an SMS to the doctor.

GG33

Marks Announcement through SMS

The student’s performance can be sent to their parents by the lecturers using this project.

GG34

Cell Phone based Street Light Controlling System

The on and off controls of the street lights can be done using GSM technology.

GG35

Temperature Measurement over GSM Mobile

Temperature sensor is used to measure the temperature in a particular room and this measured value is sent through GSM to the user mobile

GG36

Password protected GSM based Device control.

Controlling the devices from remote places only by authorized persons

GG37

SMS-Electrical Apparatus Control in Offices

The different apparatus in the offices can be controlled by sending predefined SMS to the controlling unit.

GG38

GSM controlled Door Latch opener with Security Dialup with changeable Telephone number

Security is provided in the restricted areas using GSM technology. The door of the restricted areas can be opened only by sending predefined SMS to the controlling unit.

GG39

Development of a GSM based Vehicle Security System

The project is designed to provide security to the vehicle using GSM

GG40

GSM based Vehicle gaseous fuel leakage detection with Automatic safety warning and alerting system.

The project aims in designing a system that would detect if there is any fuel leakage from the vehicle and if so, activates the alert system and also sends as SMS to the user mobile to warn the person to take immediate measures.

GG41

SMS based Banking security system

In this project we are providing security to the banks. Sensors are arranged to read the status of different parameters. If the sensors trigger, a predefined SMS will be sent immediately to the user mobile by the controlling unit.

GG42

Home Automation and Security System using GSM

Providing security and controlling the devices in the home using GSM is carried in this project.

Project code

Title of the Project

Description

FP1

Fingerprint based Access Control system

Security is provided in restricted areas using fingerprint technology. The persons are asked to give their fingerprint and the system compares this fingerprint with the already stored information in the system and only allows into if it is an authorized one.

FP2

Fingerprint Recognition enabled Passport Management System

This system asks for the checking of the fingerprint of the user along with the passport at the time of checking in the airports.

FP3

Fingerprint  based bank locker system

Authorized persons are allowed to access their bank account by producing their fingerprint at the counters every time.

FP4

Fingerprint based Attendance Record System

By this project, the attendance of the persons either in the academic institutions or in the offices is maintained.

FP5

Finger print based elevator(lift) operating system

Only authorized persons are allowed to access the lift controls.

FP6

Fingerprint based Electronic Voting Machine

This system can completely eliminate rigging and false votes.

FP7

Fingerprint based Authentication and Controlling System of Devices

The devices are controlled only when the authentication is proved and the system accepts the fingerprint of the user.

FP08

Locker opening and closing system

Using RFID, fingerprint, password

And GSM

With this we will provide more security system for our lockers. Here we are implementing three level security system

Project Code

Title of the Project

Description

ZB18

A Low Cost Design & Monitoring Of  Automatic Irrigation System Based On Zigbee Technology

This project is used to make the irrigation system atomization for saving power and water

ZB19

Implementation Of ZigBee Based Home Automation System Using Voice Recognition

With this we can control home appliances from voice inputs. This will be helpful for patients and handicapped people

ZB20

Remote monitoring and Controlling using cascaded Zigbee communication

In this project we will control the various loads in various rooms using cascaded ZigBee and IR

ZB01

Modern restaurants atomization for wireless menu dish ordering using touch panel and ZIGBEE.

On touch panel all the items are present and we can order them just by touch and confirm, the items are automatically served by them

ZB02

Touch Screen And Zigbee Based Wireless Communication Assistant In Airlines

In airplanes this systems are installed for each user. If they need any service they need to touch the relevant button and confirm then this system sends your service with your seat number.

ZB03

Touch screen and Zigbee based voice guider for patients

This will be useful for patients and old age people .if they touch the relevant switch for their service that will be announced through speaker

ZB04

Development of a smart power meter for AMI based Zigbee communication Advanced Metering Infrastructure (AMI)

This will be useful in heavy apartments .individual meters data will be collected and maintained by main system .this main system sends collected data to electricity board

ZB05

Remote Power On/Off Control And Current Measurement For Home Electric Outlets Based On A Low-Power Embedded Board And Zigbee Communication

We can control the home appliances through Zigbee remote and this system will display the power consumed by the loads

ZB06

Remote-Controllable and Energy-Saving Room Architecture Based on Zigbee Communication

In this we can control the loads through Zigbee remote or they will also be  controlled automatically to save the power

ZB07

Innovative Congestion Control System for Ambulance Using ZIGBEE

We can change the sequence and duration of traffic signals whenever traffic is more using Zigbee communication

ZB08

Zigbee based wireless Electronic Notice Board with Multi Point Receiver

We can send the data to electronic notice boards from system through Zigbee wireless communication. From single system we can operate multi notice boards

ZB09

Zigbee Device Access control system with Reliable data transmission Industrial Process control and Automation system through Zigbee n/w

Controlling the devices using Zigbee technology

Controlling many devices and providing automation from remote places

ZB10

Multi stage Real time Weather monitoring System via Zigbee in Homes/Industries.

This project is intended in gathering the environment variables in homes or in industries for prediction of the weather.

ZB11

Zigbee Wireless Vehicle Identification and Authentication System.

Identifying the vehicle and allowing the vehicle into the secured premises only when the system received the signal from the central processing unit.

ZB12

Applications of Short Range Technologies to Industrial Automation: A Zigbee Approach

Industrial devices are monitored and controlled using Zigbee Technology

ZB13

The Wireless Sensor Network for Home Care System using Zigbee

Various sensors are used to monitor the home continuously and if any sensor triggers, the system immediately passes this information to the user using Zigbee.

ZB14

System for Measuring Power Parameters with Zigbee Connectivity.

This system measures the power from each home and sends to central system which is useful in apartments.

ZB15

Wireless Data Encryption and Decryption Using Zigbee

Which used in security applications

ZB16

Zigbee Based Automated Irrigation System.

Using Zigbee this system controls the irrigation system automatically.

ZB17

Zigbee enabled pantry updating wireless network and data synchronization using hand held device.

This system reduces the man power and makes the pantry order and delivering process fast. As the person entering the data it will be updated immediately in pantry so that they can start the process immediately

Project Code

Title of the Project

Description

BL1

Bluetooth Robot with CMOS image sensor(SPY ROBOT)

We can control this robot through Bluetooth from PC and the video sent by robot can be seen in TV or PC.

BL2

Remote controlled home automation using Bluetooth.

With this we can control home appliances like lights, fan, motor, etc through Bluetooth. This is safe and secured.

BL3

Bluetooth based industrial data acquisition system

This project measures different parameters in industry like voltage, current and temperature and transmit this data to PC continuously through Bluetooth.

BL4

Industrial devices controlling system using Bluetooth

With this we can control industry appliances like machines and motors through Bluetooth. This is safe and secured.

BL5

Intelligent electricity billing system using Bluetooth.

This system receives the units consumed from various meters and generates the bill accordingly. This saves the cost, time and manpower.

BL6

Wireless secured data transmission

With this we can transfer data between two systems with security

Project code

Title of the Project

Description

TS1

Touch screen based   wheel chair control system

In this the wheel chair is controlled just by touch the required buttons to control the direction of the wheel chair.

TS2

Touch screen and Zigbee based voice guider for patients

Which useful for patients and aged people ,this system plays respected voice messages depends upon the button the user touches

TS3

Touch screen based remote controller robot with wireless camera

The robot can  be controlled just by touching keys and this robot having wireless camera on it to monitor that area

TS4

Touch screen based wireless PC controller

We can control the PC using this wireless device .We can open the folders, shutdown the system, etc.

TS5

Touch screen based smart home automation

We can control the home appliance just by smart touch

TS6

Touchpad-Controlled-Vehicle-a-Car-in-Future

In this we can control car using touch screen

Project Code

Title of the Project

Description

SB2

Smart blind stick with ultrasonic sensor

This stick gives different sound intensity depends upon the object distance from person or we can play some voice also depends upon distance.

SB3

Long range liquid level measurement in chemical industries.

With this we can measure levels up to 3 meters range

SB4

Automatic bottle filling system.

This system automates the bottle filling system by controlling the motor and conveyor belt

SB5

PH meter.

This meter measures the PH for different acids.

SB6

Alcohol breath analyzer

This is a digital alcohol meter which detects the level alcohol consumed by person

SB7

Intelligent system for hazardous gas, human detection and temperature monitor control using GSM technology.

This is a intelligent security and safety system for industries. If anything goes wrong then it sends a message to user numbers immediately

SB8

Temperature and light control of an incubator.

Incubator maintain constant temperature and light intensity. In this we will control the temperature and light intensity to maintain constant environment

SB9

PIR sensor based power saver for auditorium and conference hall.

This project is used to save the power in conference halls and in auditoriums. When there are no persons in the hall, then lights and fans will be switched off automatically.

SB10

Brick sorting using color sensor.

With this we can separate the bricks according to their color. We can use this project for medicines separators also.

SB11

Patient safety system using heart beat and temperature monitoring.

In this we will monitor the patient parameters like heartbeat and temperature

SB12

Intelligent security and safety system for colleges and industries

This project detects fire accidents, gas leakages and also alert through SMS  when main door is closed without closing any other room entrance or if any other door is opened without opening main door

SB13

Ultrasonic Spectacles and Waist-belt for Visually Impaired And Blind Person

This project is design to help blind people to guide them effectively while walking

SB14

Intelligent-Two-Axis-Solar-Tracking-System-with-Mechanical-Application

This new tracking system will acquire more power from Sun using two axis solar tracking

SB15

Microcontroller based toxic liquid level monitoring control system 

This projects is used to measure the liquid level more accurately using ultrasonic sensor measurement method

Project Code

Title of the Project

Description

Cost

M1

MEMS based hands gesture controlled robot

This robot follows your hand movements.

4000 with RF technology and 7000 with Zigbee technology

M2

Hand movement  recognition  System Based Mouse With Mems Accelerometer

You controlled your PC using your hand movements, like curszor scrolling and folder opening and closing

4000 with RF technology and 6500 with Zigbee technology

M3

Fall Detection & Activity Monitoring For Oldsters

We can monitor  elders and patients and also we can detect and intimate  if they fall

2700 without GSM and 4200 with GSM

Project Code

Title of the project

Project Description

RFID14

RFID based railway platform to display exact position of each coach

This system helps for railway department to display the coach number at exact position on platform coach number displays.

RFID15

RFID which detects the icons beside the road

This system is used to give automatic information about speed breakers, road turns, etc.

RFID16

Tourist guidance system with multi language system

This system will give voice explanation about particular thing in different languages ,it is used as best tourist guide

RFID17

Electronic protection system to avoid exam paper leakages.

This system is used to avoid exam paper leakages this will be done using RFID and GSM technologies

RFID01

Student college alert system to parents by their entry at the college premises by using RFID and GSM SMS technology

This system sends a message to the parents when the student come to school or college

RFID02

RFID based Shopping trolley

With this we can save billing time and instantaneously the rate of the product will be displayed so that we can do the shopping within our budget

RFID03

Examination room guide using RFID for the jumbling system based EXAMS

This system will show you the block and room number that is allotted for you in exams

RFID04

Voter Credentials System using RFID Technique

The user, whoever wishes to poll his vote, has to show his voter card at the time of polling. The system compares the card information with the already stored database and if matched, the system allows the user to poll his vote. The voter cards issued to the user will be written with an unique number. This number does not match with any other user.

RFID05

RFID based attendance system

In this a RFID card is issued to the each person. With the help of this card, the respective person’s attendance is recorded and displayed whenever required.

RFID06

RFID based Highway Toll Collection

The project aims at providing the ultimate solution for the people travelling on the highways to operate the toll gates. The system enables the drivers to travel on the highway roads while simplifying and collection of toll tax.

RFID07

RFID security access control system

Authorized person will be given a card. The system check for this card.

RFID08

Library management system using RFID

The responsibility of managing the books, the issue and return of the books to the students is carried out in a more efficient way using RFID technology.

RFID09

Bus location announcement system

This system gives the information about whether the bus is arrived or departure.

RFID11

RFID based Ration Card

The user can buy the grocery items from the ration shop using the smart card based ration card.

RFID12

Prepaid Energy meter

The user has to make an advance payment before using the electricity. He has to purchase the prepaid card and recharge the energy meter fixed in his/her house with the units in the card. He can utilize the electricity until the units are zero. If the available credit is exhausted, then the supply of electricity is automatically cut.

RFID13

RFID based Car Parking System

It aims at effective parking of the cars, deducts the fare for the parking of the car from the card available with the user.

Project Code

Title of the Project

Description

RB1

Intelligent metal detection and fire alert robot

This robot gives the alert when metal or fire detects

RB2

SMS operated Robot

We can operate this robot by sending SMS from anywhere in the world

RB3

Security guard with camera and night vision light

This robot continuously monitor some area and sends video of that place ,this robot has night vision light also

RB4

Intelligent Fire extinguisher vehicle

This robot operates the fire blower when fire accident is occurred

RB4

Intelligent obstacle detection and avoidance robot

This robot takes diversion automatically when object is detected

RB5

Pick and place robot controlling with wire or wireless

With this robot we can pick the objects and place in some another place

RB6

MEMS based robot.

This robot will be operated by hand movements using MEMS.

RB7

Smoke and LPG Gas detection robot with wireless control.

This robot will detects the Gas leakages

RB8

Wireless Voice and image transmission robot for surveillance system

This robot will transmit the voice and image of the data

Project Code

Title of the Project

Description

SC1

Advanced Train Ticketing System using Smart Card

The issue of the train tickets to the passengers is done using the smart card technology. The fare will be automatically calculated by the system and the passenger will be issued with a ticket with the journey and fare details in it.

SC2

Unmanned petrol bunk system.

A card is given to the user which has some money. The amount is deducted when petrol is bought.

SC3

Vehicle Parking System Using Smart Card

Vehicles are parked based on the smart card where the details of parking time is stored

SC4

Prepaid energy meter using smart card

In this, the user has to recharge with some number of units. These units are available in smart card based recharge card.

SC6

Smart card based attendance system

The person is given id card which contains his particulars. Based on this card, his attendance is recorded and stored.

SC7

Smart Card Based Security Access Control System

Security is provided in restricted areas using smart card technologies. The persons are checked with their card information with the already stored information in the system and are only allowed into if the card is an authorized one.

SC8

Hospital Management System using Smart Card

The people who make visits to the hospitals are issued health cards. The card when inserted into the reader gives the entire details of the patient holding the card. The details include body temperature, pulse rate etc.

SC9

Prepaid Card For Internet Browsing System

The people using the net cafes for browsing are issued with these cards. The system records the in-time and out time of the user into the net browsing center and deducts the amount from the card automatically according to the timings. If the balance is low or nil, the user has to recharge the card to have the access of the internet browsing.

Project code

Title of the Project

Description

RF14

Automatic vehicle speed control and check point logging system.

The idea of the project is to install a microcontroller based circuit inside cars to control the speed as well as to transmit information about car as well as the driver. The project consists of a microcontroller based board that is to be placed inside the car and another (several) microcontroller based board(s) to be installed along the route.

RF1

Wireless Electronic Notice Board using RF

We can send the data to be displayed to the notice boards from the office itself.

RF2

Wireless Data Encryption and Decryption for Security in Army Applications

In this project, we will encrypt the data at the transmitter end and at the receiver end we will decrypt the data to retrieve the original data.

RF3

RF based industrial Automation System

The industrial loads like motors, coolers, etc are monitored and controlled by a RF remote.

RF4

Advanced Vehicle Access control system

An automated check post system is designed to check the vehicles trying to enter into the secured premises. The system allows the vehicles to enter into only after the authorization from the processing unit.

RF5

Patient Monitoring using RF.

The details of the patient will be sent to the doctor continuously in a wireless fashion and the doctor can take immediate action whenever necessary.

RF6

Wireless Intrusion Detection, Electronic Security and Control System using Central Monitoring System

Designing a system that detects if anything goes wrong in an area, provide security by activating the buzzer and monitor the area continuously.

RF7

RF based Electrical Devices Control System.

The status of the electrical devices is continuously monitored and can be changed at any time using this project.

RF8

Automatic Station Indication System for Railways

This system intimates the passengers about the forthcoming station when the train is about to reach that station.

RF9

DC motor speed and direction  control using RF

In this project  we can control speed and direction  of DC motor depending on the requirement  using RF signals

RF10

Wireless Data Logger Using RF Communication.

The data logger records status of various devices over a period of time and transmits the same to the receiver module.

RF11

Wireless Stepper motor control using RF

The stepper motor direction can be controlled using RF communication.

RF12

Advanced Embedded Remote Robot using RF

Designing a system that behaves like a robot controlled by the RF remote.

RF13

Simple Messenger Development without Internet

A simple messaging device is designed using RF without need for internet.

Project code

Title of the Project

Description

PC1

Power Management System in Hotels using PC

The various appliances in the hotels are controlled by giving commands from the PC. 

PC2

PC based Manual Guided Vehicle using RF wireless technology

The movement of the vehicle is controlled by giving commands from the PC and these commands are transmitted through RF. The vehicle at the receiver section will be controlled by the commands received.

PC3

PC based Hi-tech Home Implementation

We can control the home appliances just by sitting in front of PC.

PC4

Industrial Automation using PC

The industrial appliances are controlled by the commands issued from the PC. The controlling unit receives these commands from the PC and controls the devices according to the commands.

PC5

Industrial Data Acquisition System using PC

The various parameters like temperature, humidity, current, voltage are read from the sensors and displayed in the PC for future studies

PC6

Wireless Notice Board using PC

The data to be sent to the notice board will be sent from the PC. This data will be displayed on the notice board using wireless RF technology.

Project code

Title of the project

Description

IR1

Industrial  electrical  appliances control using  IR

To reduce the manpower for controlling the devices we are implementing this project. Here we will be controlling  devices by using a general TV REMOTE

IR2

DC motor speed and direction control using IR

A DC motor is controlled using wireless communication. In this project we can control the speed of the dc motor and its direction.

IR3

Stepper motor control using IR

The direction of the stepper motor can be controlled using an IR remote.

IR4

Automatic Room light controller with visitor counter using IR

This project displays the number of persons present in the room and controls the light according to the intensity of daylight.

IR5

Auditorium Controlling System

The lights and fans in auditorium are controlled by IR remote.

IR6

Automatic Railway Gate Control System using IR

The gates on either side of the railway track are opened and closed immediately without delay when the train arrives on the track

IR7

Advanced Embedded Automatic Car Parking System

This system automatically allows the cars to be parked according to the space available in the cellar.

IR8

Time Measurement System for Athletics

This system measures time for Athletics to reach the target point

IR9

Remote controlled digital clock or fares display using IR

The time or fares can be changed and displayed using IR remote.

IR12

Shopping Malls Security and Power Management System using IR.

The design of security and the method of consuming the power in the shopping malls are carried out in this project.

IR14

Data Transfer between two Microcontrollers using IR Communication

The project aims at designing a system which enables the data transfer between two microcontrollers in a wireless fashion.

IR15

Anti-Theft Alarm System

In this project, an alarm system is designed and will be activated immediately whenever the sensors trigger to indicate that something is going wrong.

IR16

Intelligent Object Counting System

The project is designed to count the number of objects in a certain area and display it.

Project code

Title of the Project

Description

MC1

Intelligent Train Engines To Avoid Accidents

Designing a system that works as an accident avoidance system using microcontroller.

MC2

The Smart Medical Refrigerator

By using this project, we can remind the patient to take the medicine at prescribed timings.

MC3

Embedded Green House Automation System

The temperature and light intensity are controlled in green houses.

MC4

Substation Monitoring And Controlling System

This project aims at continuously monitor the load conditions of the substation. If the load exceeds the rated capacity, the controlling unit automatically shuts down the substation.

MC5

Implementation Of Electronic Voting Machine Via Data Retrieval   System

This project is designed to prevent rigging up to maximum extent. The controller section continuously for the input. Once the input is taken, it does not take the input again until it gets the access from the supervisor control.

MC6

Touch Me Not A Fun Game

This project is mainly designed as Events to be conducted at Exhibitions, Fetes etc. This project includes different interfacings with the microcontroller.

MC7

AC motor speed control using TRIAC

The speed of AC motor can be varied rapidly on and off by TRIAC.

MC8

Phase Sequence Indicator and Controlling System

The controlling unit continuously whether 3-phase is coming from the line or not so as to run the motors which run only with 3-phase. If 3-phase is not coming, the controlling unit automatically shuts down the system.

MC9

Boiler Monitoring and Control System

The temperature is measured and controlled for the industrial boilers.

MC10

Involuntary Industrial Power Scheduler using Embedded System

The power management in the industries can be done effectively using this project.

MC12

Power Saver for Advertisement Hoardings using RTC.

This system switches on the lights only at preprogrammed timings using RTC thus saving the power up to the maximum extent.

MC13

Solar Tracker for acquiring maximum power

The project aims at designing a system that would sense and follow the position of the sun and rotate the panel in the direction of the sun to obtain maximum power output.

MC14

Automatic Liquid Dispensing System used in Tea/Coffee, Soft drink  Vending Machines

The controlling unit detects the choice of the soft drink pressed by the user and starts dispensing the liquid when the cup is placed on the tray of the vending machine.

MC15

Water Scheduling for Municipalities

Water supply to different localities is done on time basis. The supply will be automatically cut once the time allotted to that particular locality lapses.

MC16

Electronic Security System for Homes/Industries with auto dialer

This system provides security to the homes or offices by interfacing sensors with the controlling units. If anything goes wrong, the system automatically dials up to the predefined number and also activates the alert system

MC17

Implementation of Digital Calendar

This Project Digital Calendar using Microcontroller is an advanced digital calendar, which displays the Date, Day and Month over the LED display.

MC18

Energy Saver for Automatic Room Light Controller with Visitor Counter

The system aims at saving the power by switching on/off the light depending upon the sensor output. It also counts the number of persons present in the hall and displays this value on the LCD.